• ISO 9001Certification
  • 24/7Service
  • QualifiedProfessionals

astm a564 type 630 h1075

  • Description:Chemical Composition ( ASTM A564 Type 630 / 1.4542 /ASTM A564 UNS S17400 (H1075) Precipitation Hardening Stainless Steel ASTM A564 is a standard material specification for hot-rolled and cold-finished age-hardening stainless steel bars,including type 630 / UNS S17400 / 17-4 PH used for parts requiring corrosion resistance and high strength at ...
  • Email: [email protected]
Online Chat Leave a Message

astm a564 type 630 h1075 Description

FeedbackSS 17-4 PH UNS S17400 ASTM A564 AMS 5642 MIL-S

IntroductionLow Temperature PropertiesCorrosion ResistanceForgingHeat TreatmentMachiningRemoving Heat TintGrinding and PolishingElevated Temperature UseWeldingT630 is a 17-4 PH martensitic precipitation hardening stainless steel with a unique combination of high strength and good corrosive resistance.Supplied in either the H1075 (H580) aged condition with a tensile strength of 1000 Mpa minimum (HB 311 min.),or the H1150 (H620) double aged condition with a tensile strength of 930 Mpa minimum (HB 277 min.).It is characterised by high tensile strength and high yield strength obtained by solution annealing,followed by a single or double low temperature (precipitation) aSee more on fountainheadalloysARMCO 17-4 PH - AK SteelASTM A564 Type 630,Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes ASTM A705 Grade 630,Standard Specification for Age-Hardening Stainless Steel Forgings The grade can also be ordered conform the What is 630 steel?What is 630 steel?Type 630 is a martensitic stainless steelthat offers superior corrosion resistance.It is magnetic,readily welded,and has good fabricating characteristics,though it will lose some toughness at higher temperatures.Stainless Steel Alloy 630 - Continental Steel Tube Company What is ASTM steel?What is ASTM steel?ASTM A53steel.ASTM A53 is a carbon steel alloy,used as structural steel or for low-pressure plumbing.The alloy specifications are set by ASTM International,in specification ASTM A53/A53M.ASTM A53 - Wikipedia

What is Type 630 stainless steel?What is Type 630 stainless steel?Stainless Steel Alloy 630.Type 630,better known as 17-4,is the most common PH stainless.Type 630 is a martensitic stainless steelthat offers superior corrosion resistance.Stainless Steel Alloy 630 - Continental Steel Tube Company17-4 PH Stainless Steel (SS) - UNS S17400 Bar Farmers

ASTM A564,Type 630,AMS 5643 To inquire about a quote,please contact our San Antonio Branch at (800) 638-2589.Share Quick Alloy Finder.Jump directly to the page you are looking for by entering a query below.Ask A Specialist Fields marked with * are required.17-4 PH Stainless Steel Bar - 17-4 ASTM A564 Supplier Our 17-4 PH Stainless Steel (SS) is a precipitation hardening martensitic stainless steel.Typical usage is seen in applications requiring high strength and a modest level of corrosion resistance.Strength and toughness desired can be manipulated by temperate range in the heat treatment process.Best Stainless offers high quality standards including UNS S17400,AMS 5643,ASTM A564,and ASTM A693 Grade 630.

17-4 PH Stainless Steel Bars - Bird Stainless Steel

* ASTM A564 Type 630 (17-4 PH) (Round,Square and Rectangular bar) H1025 (Round bar) H1075 (Round bar) H1150D (Round,Square and Rectangular bar) FV520B (Primary Hardened,750/550 Aged) (Round bar) * Materials where applicable are supplied in accordance with NACE MR0175.Rounds 3mm dia.to 520mm dia.Rectangular 50.8mm x 12.7mm to 240mm x 17-4 PH&Stainless Steel,UNS S17400ASTM A564,ASTM 693,AMS 5523,AMS 5604,AMS 5643 17-4PH&Alloy Description 17-4 PH&is a martensitic,chromium-nickel-copper precipitation-hardening stainless steel that provides an outstanding combination of high strength,good corrosion resistance,good mechanical properties at temperatures up to 600ºF (316ºC).17-4 STAINLESS AMS 5643 AISI 630 UNS S1740017-4 stainless steel ams 5643 aisi 630 uns s17400 17-4 Stainless is a martensitic chromium-nickel-copper stainless steel in the solution treated (annealed) condition.It can be further hardened to various strength levels by a single precipitation hardening heat treatment that minimizes scaling and distortion.

17-4 STAINLESS STEEL AMS 5643 AISI 630 UNS

Custom 630 Common Specifications AMS 5643 AMS 5643/H1025 for purchase in Solution Treated and Aged to H1025 AMS 5604 ASTM A564 Type 630 ASME SA564 AMS 5825 Welding Wire AMS 5827 AMS 7474 ASTM A693 ASME SA693 ASTM A705 ASME SA705 17-4 Density Condition Density Cond A 0.280 #/in3 Cond H900 0.282 #/in3 Cond H1075 0.283 #/in317-4 Stainless Steel 630 Alloy17-4 Precipitation Hardening also known as Type 630 is a chromium-copper precipitation hardening stainless steel used for applications requiring high strength and a moderate level of corrosion resistance.High strength is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius).Alloy 17-4 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions.17-4PH / 1.4542 / S17400 - Stainless Steel - Precipitation Intoco are also a very large UK and European stock-holder of hot work tool steels,stainless steels (440c / 1.4125 / 4125 / X105CrMo17 and F51 / 1.4462 / X2CrNiMoN22 Duplex) and now 17-4PH / 17/4PH / Euronorm 1.4542 / 1.4548 / Type AISI Type 630 ASTM A693 / A564 grade 630 / AMS 5604B / AFNOR Z6CNU17-04 / Din EN X5CrNiCuNb16.4 / JIS SUS630

17-4PH ASTM A564 Bars Grade 630 AISI 630 products Like

17-4PH ASTM A564 Bars Grade 630 AISI 630.Nestle Steel India Leader Suppliers Stockist of 17-4PH ASTM A564 Bars Grade 630 AISI 630.Nestle Steel is a force to reckon with in the field of manufacturing and exporting premium quality 17-4PH ASTM A564 Bars Grade 630 AISI 630 Products.Alloy Steel,Stainless Steel,Duplex Stainless Steel and Cupro Nickel and Low Temperature Services.17-4PH Alloy Fabrication Manual [Corrosion ResistantASTM A 564 Type 630 Bars and Shapes A 693 Type 630 Plate,Sheet and Strip A 705 Type 630 Forgings ASME SA-564 Type 630 Bars and Shapes Welding of RA17-4 in conditions H900 through H1075 is not recommended.No preheat is usually necessary for sections up to 4 thick.For restrained welds a 200-300°F (100-150°C) preheat is beneficial.17-4PH Stainless - Delivered Nationwide by West Yorkshire 17-4PH stainless steel stockholders and suppliers,delivering to the whole of the UK.West Yorkshire Steel are suppliers of 17-4PH stainless steel round bar and flat bar.17-4PH is a corrosion resistant grade which is soft and ductile in the solution annealed condition.

A564 Type 630,17-4PH,SUS630 Comparison,

Translate this pageASTM A564 Type 630.SUS630 . , . . .17-4PH(630),17-7(631) .,ASTM A564 Type 630,17-4PH,SUS630 Comparison, Translate this pageASTM A564 Type 630.SUS630 . , . . .17-4PH(630),17-7(631) .,ASTM ASME SA 564 - Rolled Alloys,Inc.Types 630,XM-16,and XM-25 may be furnished in the solution-annealed or age-hardened condition.Type UNS S46910 shall be furnished in solution annealed,cold-worked or aged-hardened condition.Shapes may be subjected to either Class A or Class C preparation for

ASTM A564 / A564M - 19a Standard Specification for Hot

Type 631 and 632 stainless steels contain a large amount of ferrite in the microstructure and can have low ductility in forgings and large diameter bars.Material of types other than XM-16,XM-25,and Type 630 shall be furnished in the solution-annealed condition,or inASTM A564 Grade 630 H1075 - Precipitation Hardening ASTM A564 Grade 630 H1075 - Precipitation Hardening Stainless Steel - Matmatch.A Precipitation Hardening Stainless Steel also known as DIN 1.4542 ,JIS SUS630 ,ISO X5CrNiCuNb16-4with Tensile strength = 1000.0MPa.Datasheet Download.ASTM A564 Stainless Steel Materials - MatmatchThe ASTM A564 (A564M is the equivalent metric version of A564) is a technical specification a that covers bars and profiles of age-hardened stainless steels.Variations of the steels covered are hot-finished or cold-finished rounds,squares,hexagons,bar

Ams 5643 Astm A564 Type 630 Steel Bar Suppliers Mumbai

Astm A564 Uns S17400 Round Bar,Astm A564 Jis Flat Bars,Astm A564 Sus630 Square Bar,Astm A564 Tp630 Supplier Astm A564 Steel Rod,Astm A564 Type 630 Box Bar,SS Astm A564,Astm A564 Ams 5643 Stockist Suppliers in India,South Africa,Indonesia,Dubai,Brazil,SriAtlas Grade datasheet 630 rev May 2008 July 2010Grade 630 is resistant to sulphide stress cracking (SSC) if highly aged; NACE MR0175 permits the use of 630 but only in a double age hardened condition (refer to MR0175 and ASTM A564M).In solution treated Condition A the grade has lower resistance to stress corrosion cracking,and lower ductility compared toBuy Industry Leading All-Purpose a564 type 630 - Impact-resistant and durable a564 type 630 for construction,shipment,and defence at .Irresistible deals on a564 type 630 you just can't afford to miss.

Chemical Composition ( ASTM A564 Type 630 / 1.4542 /

ASTM A564 UNS S17400 (H1075) Precipitation Hardening Stainless Steel ASTM A564 is a standard material specification for hot-rolled and cold-finished age-hardening stainless steel bars,including type 630 / UNS S17400 / 17-4 PH used for parts requiring corrosion resistance and high strength atExperienced supplier of 17-4PH bar,17-4PH plate,17-4PH Features 17-4PH is a chromium-nickel-copper precipitation hardening martensitic stainless steel that combines oxidation and corrosion resistance comparable to 304 in most environments with high strength and hardness.It is the most widely used of all the precipitation hardening stainless steels,and is more cost effective than many high nickel non-ferrous alloys in someApplications.17-4PH ISO 9001:2000 QS-9000 IMCO630 - 1AISI 630 ASTM 17-4 PH COGNE 630/3 COMPOSIZIONE CHIMICA INDICATIVA NOMINAL CHEMICAL COMPOSITION C S Nb Cu Mn Cr Ni Mo Si 0.02 0.025 5xC 3.20 0.70 15.5 4.5 0.20 0.35 DESCRIZIONE DESCRIPTION Acciaio inossidabile al Cr Ni Cu indurente per precipitazione 630 is a precipit ation hardening Cr-Ni-Cu stainless steel IMPIEGHI

Images of Astm A564 Type 630 H1075

images630 (17-4) Precipitation Hardening Stainless Steel Bar 630 (17-4) Precipitation Hardening Stainless Steel Bar 630 is a 17-4 PH martensitic precipitation hardening stainless steel with a unique combination of high strength and good corrosive resistance.Supplied in either the H1075 (H580) aged condition with a tensile strength of 1000 Mpa minimum (HB 311 min.),or the H1150 (H620) double aged condition with a tensile strength of 930 Mpa minimumLocation 11930 PROCTOR RD,Houston,Texas,77038Phone (877) 741-8548630 (17-4) PRECIPITATION HARDENING STAINLESS630 is a 17-4 PH martensitic precipitation hardening stainless steel with a unique combination of high strength and good corrosive resistance.Supplied in either the H1075 (H580) aged condition with a tensile strength of 1000 Mpa minimum (HB 311 min.),or thePeople also askWhat is ASTM 564?What is ASTM 564?ASTM A 564.Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes.This specification covers bars and shapes of age-hardening stainless steels.Hot-finished or cold-finished rounds,squares,hexagons,bar shapes,angles,tees,and channels are included.ASTM A 564 - Rolled Alloys,Inc.

Precipitation Hardening Stainless Steels - 17-4PH

ASTM A564 Type 630 Materials; AISI 630 Materials; ASTM A564 Stainless; 17-4PH Materials Importer; ASTM A564 SUS630; W.Nr 1.4542 X5CrNiCuNb17 4; W.Nr 1.4548 X5CrNiCuNb 17 4 4; AISI 630 AISI S17400; ASTM A564/A564M-99-630; SAE J467 17-4 PH; UNS S17400; Forms:-17-4ph materials available in; Round bars; Bright bars; Heat-treated bars; Forged bars Precipitation Hardening Stainless Steels - Bird Stainless * ASTM A564 Type 630 (17-4 PH) Treatments; H1075 H1100 H1150D FV520B (nbsp)(Primary Hardened,750/620 Overaged) * Materials where applicable are supplied in accordance with NACE MR0175.Rounds 3mm dia.to 520mm dia.Rectangular 50.8mm x 12.7mm to 240mm x 75mm.Square 12.7mm Sq.to 50.8mm Sq.Related searches for astm a564 type 630 h1075630 stainless steel propertiescondition h1075astm a564 type 630 h1150a564 630 h1150astm a705 630astm a564 mechanical propertiesastm a564 grade 630h1075 hardness12345NextH1075 17

Related searches for astm a564 type 630 h1075

630 stainless steel propertiescondition h1075astm a564 type 630 h1150a564 630 h1150astm a705 630astm a564 mechanical propertiesastm a564 grade 630h1075 hardnessS17400 datasheet,S17400 chemical,S17400 heat treatmenten/din1.4542 x5crnicunb16.4 afnor z6cnu17-o4 astm-a564 grade 630 uns s17400 jis sus630 ams 5643 5604 en10088-3STAINLESS STEELDec 13,2016·Contact ASTM Headquarters for latest ASTM revision.For AMS revision,contact AMS Division of SAE.AMS 5604 Sheet,Strip and Plate ASTM A693 Plate,Sheet and Strip (Listed as Grade 630 - UNS S17400) The values shown in this bulletin were established in U.S.customary units.The metric equivalents may be approximate.PRODUCT DESCRIPTION

Source H900 H925 H1025 H1075 H1100 17-4PH SUS630

Steel type.AISI 630,ASTM 630,ASTM 17-4PH,UNS S17400.JIS SUS630.Din X5CrNiCU17-04.EN 1.4542.Standard.ASTM A564,AMS 5643,ASTM A705,ASTM-A484.Size.Size 1/4 ~ 86 out diameter 13.7mm~2200mm/Customized.Finishing.Solution treated + age hardening heat treated ( H900,H1150,H1150D,H1150M,H1075,H1025 etc ) Feature of 630Source High Tensile ASTM A564 Grade 630 Stainless Steel 630,also known as 17-4ph,is famous for it's high tensile strength high hardness after age hardening treated.We produce strictly as per ASTM A564 standard with different heat treatment conditions,such as condition H900,H1025,H1075,H1100,H1150,H1150M,H1150D etc.,mainly used as marine shaft,motor shaft,impreller,offshore industry.Specification Sheet Alloy 17-4PHAlloy 17-4PH (UNS S17400),Type 630,is a chromium-nickel-copper precipitation-hardening martensitic stainless steel with an addition of niobium.17-4PH combines high strength and hardness with good corrosion resistance.The alloy is furnished in the solution annealed condition (Condition A).It

Stainless 17-4 PH

ASME SA564,SA693,SA705,Type 630 AMS 5604,5622,5643,5825 ASTM A564,A693,A705,Type 360 UNS S17400 W.Nr./EN 1.4548 Resistance to Corrosion Type 17-4 PH stainless steel has excellent resistance.It withstands corrosive attack better than any of the standard hardenable stainless steels and is comparable to type 304 in most media.Stainless Steel - Alloy 17-4PH15.50%.3.25%.0.25%.Comparable standards UNS17400 Type 630 ASTM A564 Type 630.17-4PH is a precipitation-hardening martensitic stainless steel,which combines high strength and hardness (after heat treatment) with excellent corrosion resistance,and is suitable for easy fabrication.Solution Treatments As supplied 17-4PH,is usually in the solution treated condition,(Condition A).Stainless Steel - Grade 630 - Chemical FormulaTopics CoveredIntroductionKey PropertiesCompositionMechanical PropertiesPhysical PropertiesGrade Specification ComparisonPossible Alternative GradesCorrosion ResistanceHeat ResistanceHeat TreatmentWeldingMachiningApplicationsFe,<0.07% C,15-17.5% Cr,3.0-5.0% Ni,<1.0% Mn,<1% Si,<0.040% P,<0.03% S,3.0-5.0% Cu,0.15-0.45% Nb+TaSee more on azomPublished Nov 07,2001ASTM A564 TYPE 630 UNS S17400 17-4PH Round BarFOB Price US $5000-6500 / Metric Ton.ASTM Type 630 17-4 ph stainless round bar for Chemical processing equipment.FOB Price US $2-3 / Kilogram.17-4PH ( UNS S17400,Type 630 ) stainless steel bar/ Rods.FOB Price US $0.5-1 / Kilogram.H1075 17-4ph (type 630) stainless steel round bar for aerospace industry.

Stainless Steel 17-4PH Bar (AMS 5643 / AMS 5622

ASTM A 564.17-4 PH Sol AMS 5643 ASTM A 484 AMS 5604 Sheet,Strip Cold Rolled and Plate.AMS 5622 (Vac Melt) Bars (Flat,Hex,Round,Square),Wire,Forgings,Tubing and Rings AMS 5642 Bar AMS 5643 Bars (Flat,Hex,Round,Square),Wire,Forgings,Tubing and Rings MIL-S-25043 ASTM A564 Grade 630 ASTM A484 / ASME SA484 ASTM A564 / ASME SA564Stainless Steel 17-4PH Sheet and Plate (AMS 5604 Suppliers of Stainless Steel 17-4PH (AISI 630) in Sheet,Plate and Strip (AMS 5604),Tube,Wire (ER 630),Bar (AMS 5643 / AMS 5622) and Powder (AMS 7012)Stainless Steel AL 17-4 PrecipitationAlloy (S17400),Type 630,is a chromium-nickel-copper precipitation hardening stainless steel used for applica-tions requiring high strength and a moderate level of corrosion resistance.High strength is maintained to ap-proximately 600°F (316°C).The S17400 alloy is martensitic in structure in the an-

Stainless Steel Alloy 17-4PH - Austral Wright

Also known as AISI Grade 630.Stainless Steel Alloy Grade 17-4PH is a precipitation hardening stainless steel which has extremely high strength and hardness,combined with good ductility and toughness.It has excellent corrosion resistance,approaching that of stainless steel grade 304.Designers and engineers often choose the alloy for its high strength,with corrosion resistance superior to most other highStainless Steel,Steel for Implant Devices,Surgical Grade 17-4ph STAINLESS STEEL (type 630) Stainless Custom 630 offers high strength and hardness along with excellent corrosion resistance.It is a martensitic precipitation/age-hardening stainless steel that has good fabricating characteristics.This alloy can be aged hardened by aStandard Specication for Hot-Rolled and ColdType 630,Solution-Annealed Cold Finished Centerless Ground,11 2 in.[38.0 mm] round bar,10 to 12 ft [3.0 to 3.6 m] in length,ASTM A 564 dated _____.End use valve shafts.4.General Requirements 4.1 In addition to the requirements of this specication,all requirements of the current edition of Specications A 484/ A 484M shall apply.

astma564630 - Buy 630 630

Translate this page630 17-4ph it ASTM A564 H900 H1025 H1075 H1100 H1150 H1150M H1150D impreller 17-4ph 20

20 YEARS OF EXPERIENCE IN STEEL PRODUCTION

Our Factory Workshop

Steel Plates Production Line
Steel Plates Production Line
Steel Plates Production Line
Steel Plates Production Line
Steel Pipes Production Line
Steel Pipes Production Line
Steel Coils Production Line
Steel Coils Production Line
Steel Plates Warehouse
Steel Plates Warehouse
Steels Machining Center
Steels Machining Center
Steel Deep Processing Center
Steel Deep Processing Center
Cutting and welding center
Cutting and welding center

Contact Information

  • 118 Kexue Road, Zhengzhou City, Henan Province, China
  • [email protected]
  • 0086-13569929107

Opening Hours

  • Monday / Tuesday 8:30 AM to 6:00 PM
  • Wednesday / Thursday 8:00 AM to 6:30 PM
  • Friday / Saturday 8:30 AM to 7:00 PM
  • Sunday Close

Get in Touch With Us

Complete control over products allows us to ensure our customers receive the best quality prices and service. Your email address will not be published.

S235jr Steel Plates Factory

Our Main product included Steel Plates, Steel pipes, Steel coils, Steel Section and Steel sheets, which are largely sell to Europe, South and North America, Asia, Africa, Middle-east, Southeast Asia.

Headquaters

  • 118 Kexue Road, Zhengzhou City, Henan Province, China
  • [email protected]
  • 0086-13569929107
  • 0086-13569929107

Leave a Message

If you have any need steel products, please leave you message.

* Don't worry, we don't spam.